INSTALLATION MANUALR410A Split SeriesModels FTXR28EV1B9FTXR42EV1B9FTXR50EV1B9DeutschFrançaisNederlandsEspañolItalianoΕλληνικÜPortuguesРóссêийEnglishTü
English 84.Laying piping, hoses, and wiring.• Connect the humidifying hose to the indoor unit duct. See 5. Humidifying hose installation work for det
9 EnglishIndoor Unit Installation4-4. Wall embedded piping. Follow the instructions given under .1) Insert the drain hose to this depth so it won’t b
English 106.Wiring.1) Strip wire ends (15mm).2) Match wire colours with terminal numbers on indoor and outdoor unit’s terminal blocks and firmly scre
11 EnglishIndoor Unit Installation4) Remove the electric parts box cover. (3 tabs) (Refer to Fig. 2)4-1) Discharge the tab 3.4-2) Pull up the electri
English 12Setting the Humidifying Hose Length1.Setting the humidifying hose length. • Set the humidifying hose length to ensure humidifying capacity.
13 EnglishRefrigerant Piping Work1.Flaring the pipe end.1) Cut the pipe end with a pipe cutter.2) Remove burrs with the cut surface facing downward s
English 14Trial Operation and Testing1.Trial operation and testing.1-1. Measure the supply voltage and make sure that it falls in the specified range
(1012) HT3P190651-1J M06B103DTwo-dimensional bar code is a codefor manufacturing.00_CV_3P190651-1J.fm Page 2 Monday, November 29, 2010 4:12 PM
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,Kita-ku, Osaka, 530-8323 Japan DAIKIN INDUSTRIES, LTD.Low Voltage 2006/95/ECElectromagnetic Compatibi
1 EnglishSafety Precautions• Read these Safety Precautions carefully to ensure correct installation.• This manual classifies the precautions into WAR
English 2AccessoriesChoosing an Installation Site• Before choosing the installation site, obtain user approval.1.Indoor unit.• The indoor unit should
3 EnglishIndoor Unit Installation Drawings2.Removing and installing indoor unit. • Installation method 1) Using the marks (3 locations) on top of t
English 4Installation Tips1.Removing and installing front panel.• Removal method 1) Open the front panel.2) Spread out the shaft hole on the left sid
5 EnglishInstallation Tips3.Removing and installing the front grille.• Removal method 1) Remove the front panel, air filter and upper panel.2) Fully
English 66.How to replace the drain plug and drain hose.• Replacing onto the left side1) Remove the insulation fixing screws on the right to remove t
7 EnglishIndoor Unit Installation1.Installing the mounting plate.• The mounting plate should be installed on a wall which can support the weight of
Commentaires sur ces manuels