Daikin ARX25J3V1B Manuel d'installation

INSTALLATION MANUALR410A Split SeriesModelsRX20J3V1BRX25J3V1BRX35J3V1BRX20K2V1BRX25K2V1BRX35K2V1B

7 EnglishOutdoor Unit Installation6. Refilling the refrigerant.Check the type of refrigerant to be used on the machine nameplate.Precautions when add

English 8Pump Down OperationIn order to protect the environment, be sure to pump down when relocating or disposing of the unit.1) Remove the valve ca

9 EnglishWiring WARNING1) Do not use tapped wires, stranded wires, extension cords, or starburst connections, as they may cause overheating, electric

English 10 CAUTIONWhen connecting the connecting wires to the terminal board using a single core wire, be sure to perform curling.Problems with the w

11 EnglishTest Run and Final Check1. Trial operation and testing.1-1 Measure the supply voltage and make sure that it falls in the specified range.1-

3P291651-9U 2014.10Copyright 2014 Daikin

DAIKIN INDUSTRIES CZECH REPUBLIC s.r.oLow Voltage 2006/95/ECElectromagnetic Compatibility 2004/108/EC*3P%Takayuki FujiiManaging Director

Daikin Industries Czech Republic s.r.o.CE - DECLARATION-OF-CONFORMITYCE - KONFORMITÄTSERKLÄRUNGCE - DECLARATION-DE-CONFORMITECE - CONFORMITEITSVERKLAR

1 EnglishSafety Precautions• Read these Safety Precautions carefully to ensure correct installation. • This manual classifies the precautions into WA

English 2AccessoriesAccessories supplied with the outdoor unit:Precautions for Selecting the Location1) Choose a place solid enough to bear the weigh

3 EnglishOutdoor Unit Installation DrawingsCAUTIONSet the piping length from 1.5m to 15m.Wrap the insulation pipe with the finishing tape from bottom

English 4Installation Guidelines• Where a wall or other obstacle is in the path of outdoor unit’s intake or exhaust airflow, follow the installation

5 EnglishOutdoor Unit Installation3. Flaring the pipe end. 1) Cut the pipe end with a pipe cutter.2) Remove burrs with the cut surface facing downwar

English 6Outdoor Unit Installation5. Purging air and checking gas leakage.• When piping work is completed, it is necessary to purge the air and check